Drawer Stop

 This mod was done a couple months ago and I kept forgetting to post an update and I'm not sure why because this is a pretty valuable one, especially for those who don't like picking up the contents of a spilled drawer or having damaged stuff from a flying drawer.  Before this mod we would try to remember to take the drawer out and put it on the floor before traveling, we have forgotten more than once.  We'd also try to pack up around it so it didn't have the opportunity to fall out, that didn't always work well

either.  So after replacing the locks on the access panels (lost keys) we looked to see if there were similar "locks" but as a thumb turn rather than a key lock.  A key lock would've done the trick too, but I didn't want to have to worry about losing the key to something else again.  We found such a thing at Lowes.  

Mike notched out enough room for the stop to turn and hit the back of the cabinet.  It's perfect.  I know that most do not have household oak cabinets in their campers so if you're doing this to your camper you either may not have to notch out anything or you may have to add some thickness or something for it to catch on and where it catches may need to be reinforced on a thinner camper cabinet.  This, along with the bed lift is on my list of favorite add ons.  

Looking Top Down

From Inside, notched out.  Catches on the cabinet facing.

Spring, 2011

It's been a while since I've added anything to this blog. Spring, 2011 is on its way though. We pulled the Aliner up to the active part of the driveway yesterday and there are a few things we'd like to do to it before our first trip of the year, which is next month and it's a big one. We will be going to Myrtle Beach State Park. It'll be the camper first trip out of the state. It didn't go last year because we knew we had to replace the tires before such a trip so we tented that trip. So our to do list is:

• Replace the tires.
• Paint the sink/heater cabinet.
• Put a removable shelf in at the seat for the laptop.
• Lifts for the bed.
• Seal off opening under the bed.
• Replace the vent that I broke over the winter :(
  
• Restock.

Mike started up the heater today so while the camper was warm I went out and painted the cabinet. I had some DCR brown so that's what it is. I wish we had stained it initially, but we didn't. Mike says he can cut new wood for it, maybe down the road. I do like the DCR brown much more than the color it was. The darker brown is the same brown that I had painted the heater vent, close at least, and one of the electrically outlets. It looks better.
After:

Before:

Cabinet Update

I added the pictures to update 14, sorry they are dark I took them at night. Mike added the latches to keep the cabinets and drawers shut as well as the knobs.....my penny knobs that I picked up last year in the clearance pile at Lowes :) We took a trip to Harbor Freight last night and I picked up some great little LED lights that are magnet activated. So when you open the doors (release the magnet) the light comes on inside the cabinet. It is the little things, because I am tickled pink over this, lol. They were $2.50 each and I picked up 4. I also had a tap LED that I will put in the double cabinet. The magnetic ones would be hard to install in the double because the door opens from the middle of it and there just isn't anywhere to attach the light so it will be near the magnetic plate.
We are very motivated right now to finish things up. I have a few more curtains to make, but the doorway and the bubble windows are done now...just need to install the new rods. The big window over the sink curtains are pinned and ready to be sewn. Maybe today?

Update 10

We got a lot done this weekend!

• The two larger cabinets are installed with wiring and battery vent plumbed.
• End panels installed (which included a lot of clean up and old staple removal!).
• Rock guard and tow tongue stripped, primed and painted.
• Old fridge vents closed.
• Several outside openings cleaned up and re-caulked.
• Curtains made for the three triangle windows and the big "passenger side" window.

I spent several hours Friday night engineering and working on curtains. I don't sew, but I had fixed my mother in laws old sewing machine with this project in mind. I've been looking at fabrics and pricing them out, most more than I wanted to spend. So I picked up a couple sets of sheets on sale at Target, one set a quirky nature theme, the other solid green and I'll use a brown set from the house (top sheet only.....we never use top sheets anyway).

Saturday Mike and I worked earlier in the day on the end panels. There were a ton of staples to remove, but overall it went pretty smooth. Later in the day after Billy came home we worked on the front tongue, the rock guard and planning the electrical system. We also closed up the fridge vents, removed the fan and resealed a lot of the outside openings.

Sunday, today, we installed the two larger cabinets. We had to remove the toe kicks. The smaller ones are uppers so did not have them and fit. Mike used a straight edge and the router to trim them down. They build cleats and made cut outs for the battery vent, electrical and just a bit into the wheel well to make sure the heater will be centered over it's vent/intake. I also cleaned up a lot of the old cabinets and debris. I'm burning all the old wood, the rotted flooring went into the woods and recycling the old plastic and metal we removed.

You can see more pics under "Update 10" on the right hand side bar.

Plywood, Cabinets and Pulls.

Okay, we had bought two pieces of plywood at Lowes for the subfloor and said we'll come back for more when we need it....mistake #2, mistake #1 was going to Lowes. Yeah they save us $, just like Walmart, but at the end of the day do they really? The wood we bought said it was 19/32nds. We went back and bought two more yesterday....it was thinner, and had 4ply whereas the first set was 5ply. We had cut it, brought it back and got our $ back and checked everything they had and nothing matched, same deal at Home Depot today. So we went to the good ol' Plywood Plus store and jackpot! Found the right thickness and scored some cabinets at an unbelievable 92% off! Was seperately over $1400 for these four pieces that were ordered wrong, we paid $120 to take it away! Nice units too with pull outs inside didn't take a pic of the inside of them yet). Two are base cabinets and two are upper cabinets, but we'll use all 4 as lowers of course. Three are maple, one is oak but you can barely tell the difference because they are the same style. We will have to do some engineering to get these to work with the heater and the fridge, but we always seem to make it work and can not beat the price! Plus I had picked up some cabinet knobs off the clearance rack at Lowes yesterday for a penny each....usually $4.50 each. I bought 13 out of the 20 in the bin knowing I wouldn't need that many but for 13 cents whatever. When we went back to return the crap wood the rest were gone. You can see a few more pics on the side bar in the album called cabinets. Score!