Our Aliner Restoration: lights

Monday, June 27, 2011

"Chandelier v1.0"

Parts and pieces laid out.

I had this idea for a movable, more direct and functional light for the camper that was also 12 volt (most of our camping is dry) and "cute". My idea was to take a work light meant for emergency tire changes or working under the hood on the side of the road and add a cheap little lamp shade from the craft store to give it that "I'm not a work light" look. So I picked up this cheap little work light from eBay (there is still 364 of them left, lol) and then I bought a little shade meant for the candle lights that people put in their windows at Christmas time (using a coupon it came to $1.40). I liked this light because it had the longer, straight cord at 10 feet. It can reach anywhere in the camper and my 12 volt plug is pretty much in the center of the camper. I also liked it because it was really small. I was also looking at this one at Walmart for $6, but it is much bulkier (can't find the Walmart link at this moment). But it has a retractable cord that is maybe 6' or 8'. But again bulkier. The only reason I may still try something out with it is because I am sure it is much brighter than this little one I choose over it. So all I did was open up the wire of the shade that goes over the bulb a bit then slid the cord into an already opened up piece of a clip that went around that. I used a suction cup on the window itself, my walls are textured even though a command hook will work if I decide on a permanent spot on the wall that folds in first. I have one up already in the center for a little sign I hang up when camping. Here are a couple pictures. I'll call this Chandler v1.0. I am happy with the concept, execution and the looks of this but I just wish it was a bit brighter. The clear plastic is just glued to the red top over a bulb soldered in, maybe I'll drag Mike over to radio shack to help me find one just a tad brighter. Either way for a total cost of $5.65 I am very happy with my little light and will give it a test run this coming weekend at Otter River.

My movable 12 volt Light

Friday, May 6, 2011

LED Bulb Replacement

Thanks to free two day shipping from Amazon the LEDs and solar panel came today. I will give an update on the LEDs for now because thats quick and ea

sy. I ordered two of these. Details are as follows:

Bulb Type:BA15S Base (Single Contact)
93B2 1156 1141 Bulb Replacement with LED
Lumen:80 Lumen Color Temperature:Warm White 3100K
Working Voltage:10 - 16 V DC, Power:1.44 Watt
LED:15 LEDs, SMD3528

They were packaged very well from LED Wholesalers.

The LEDs are slightly taller and thinner and fit just fine. These are "water proof". I just thought it was a better design. The reviews also noted that in other LEDs that they had purchased they had broken the LEDs off the base putting it into the socket and the glass on these solved that issue. These are the only ones I bought so I don't really know otherwise. I'm very happy with how these feel though.

Old incandescent bulb:

Incandescent covered:

LED:

LED covered.

In the daylight they look to give off about the same light, the LED might even be slightly brighter. These are the 3000k warm led's and I think they are just a tad white and not as harsh as I thought they might be. I can only imagine the 6000k are pretty harsh. I haven't seen them in the dark yet. I'll try to check them out later. I am very happy with them in the daylight though. I was afraid they wouldn't be bright enough at only 80 lumens but they are perfect. These should only use about 1/24th of the power that the old bulbs did too!!

Future Plans

(Written shortly after bringing home the Aliner in June of 2009) I'm hoping at the end of the day to put together these blog entries and photos and publish some comprehensive notes and instructions that will help the next poor bastard out. There is a ton of knowledge out there, it's just really hard to find it in one place. We will most likely publish in google docs and link pdf or doc files here.

Our primary goal at this point is the floor. In our imaginations we can see the potential for this little unit and there is a lot of inspiration on the web. It's really hard (for me, I think Mike has his head on a bit tighter) to not want to look into the cool mods and daydream about crazy efficient cabinets and gadgets.

(May of 2011)

As of today we are working on getting into our second season of camping in the Aliner. Last year we only brought it local to Otter River State Forest in Templeton with plates off of our utility trailer and the old tires. This season after new tires we brought her to Myrtle Beach in April and have since removed the old decals and applied new ones. We love this camper, so don't ask to buy it unless you're looking to forkover 6-7k. It's pretty much a new camper now, even better it's made well....no stapled together cabinets or chintzy counter tops. It may not be the biggest thing but it is just right for the two of us!

Aliner Parts and Pieces

Aliner Owners Club on Floor Replacement

Here you can find the AOC write up on floor replacement with some helpful links, such as to the wood petrifier if you just need to fix a soft spot and links to pictures that show a floor replacement done by lifting the body of the camper and using the old floor as a template. We chose not to lift the camper and to replace piece by piece for a few reasons. The first was because the floor was so far gone it was pretty much dirt. There was no using the old floor as a template and no need to try to get it out in one piece. Second, we did not have the garage or other space to work on the camper and did all our work in our then gravel driveway. And lastly time, we didn't want to leave the camper up and apart for the length of time we thought this would all take. The main reason though was because our floor was so far gone. I think either method is fine but do realize when doing it a piece at a time you need to place the new floor in as you go or you will lose structural support. The walls are wrapped around the edges of the floor and stapled all the way around. When you remove the old flooring it will fall if you take it all off. Also doing it a piece at a time you will need to do the parameter first then the center of the floor rather than what would probably be three full sheets. We half lapped, used liquid nails and recessed bolts. We also did spray a rubberized undercoat and we added reinforcement to the rear of the frame.